Not able to login using Cisco Unified Personal Communicator (CUPC)

Unanswered Question
Jul 1st, 2009

Hi all,

I had put in the parameters for Cisco Unified Presence in CallManager 7.0.2 and Presence 7.0.4 Servers.

I had enable CTI control to users as well. In the Presence Server, I had assign users to the Profile.

When I tried to login from Cisco Unified Personal Communicator (CUPC), I could not trigger DeskPhone and Softphone from CUPC.

In the Overall System Status,

* Phone Configuration (TFTP): Download Failed. (I had created the CUPxxxx, where xxxx is user login name in CallManager -> Device)

* Presence : Connecting

* Desk Phone : Not Connected.

* Softphone : Not Active.

Any advise will be appreciated.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
htluo Thu, 07/02/2009 - 05:20

1) The device name should be UPCxxxx instead of CUPxxxx. And all in upper case.

2) You need to go to CUPS > System > Securing > Incoming ACL and add a "All" ACL. Otherwise, presence will not connect.

3) Go to CUCM > User Management > End user. Make sure you select an extension from the "Primary Extension" drop-down menu.



This Discussion