07-02-2009 03:48 AM - edited 03-18-2019 11:17 PM
I have upgraded CUE from 3.2.1 to 7.0.1 and did the factory restore as well.
Now when I go to http://142.102.66.5 to run CUE initialization wizard the GUI just won't load up, it's totally blank. It does change to http://142.102.66.5/Web/index.html but that is it.
1) I have cleared the cache/cookies on the browser, tried IE and firefox
2) CME GUI works just fine
3) IP connectivity is fine too. I can ping 142.102.66.5 from my PC and can ping from CUE CLI to my PC.
4) I can log into CUE CLI fine and have also gone through intial setup
5) Following is my config
interface FastEthernet0/0.130
description ** BR2 VOICE VLAN **
encapsulation dot1Q 130
ip address 142.102.66.2 255.255.255.0
interface Service-Engine1/0
ip unnumbered FastEthernet0/0.130
service-module ip address 142.102.66.5 255.255.255.0
service-module ip default-gateway 142.102.66.2
ip route 142.102.66.5 255.255.255.255 Service-Engine1/0
ip http server
no ip http secure-server
ip http path flash:
07-05-2009 01:40 AM
Hi,
try to change "ip http path flash:" to "ip http path flash:GUI"
if this helps, please rate
07-07-2009 05:20 AM
try:
http://
You will also have to configure the username and password under telephony-services.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide