MIB issue ASA 5510

samwharton29 · ‎07-02-2009

Hi,

I'm trying to query a mib for the asa to show me what IP peer is connected on a tunnel.

When I do a mib walk on the 5510 8.2(1) none of the OID'S for these values show up, although they should be supported.

Ie cikepeerentry or crasusername OIDs.

I would have expected the ASA to support all the OIDS that are listed in the SNMP object navigator under that IOS?

Any advice would be great.

Thanks

Sam

Lucien Avramov · ‎07-03-2009

ASA is not IOS, it's not the same supported list of mibs.

You can only have the following :

ftp://ftp-sj.cisco.com/pub/mibs/supportlists/asa/asa-supportlist.html

momeara · ‎11-20-2009

crasUsername is in the CISCO-REMOTE-ACCESS-MONITOR-MIB listed among the MIBs on that page, but says OID not supported when I try to walk that part of the MIB. I have the same problem because I can get everything (Remote IP, Local IP, VPN Group) but the user name for VPN sessions. With the 3030 VPN Concentrator it was part of the ALTIGA-SESSION-STATS-MIB. Since we've moved our Cisco VPN Client sessions to the ASA we can't monitor those using our SNMP management system. You can see the session information from a command line session on the ASA (show vpn-sessiondb remote), or from the ASDM interface, but that's doesn't help the NOC.