Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
418
Views
5
Helpful
5
Replies

Dead 2811

mcecilia
Level 1
Level 1

‎07-02-2009 06:24 AM - edited ‎03-04-2019 05:18 AM

Hello,

I have received a 2811 from a lab, and now it does not shows the boot process, nor the rommon, and does not respond to anything. I have tried with all the console speeds.

Any idea??

thanks

Labels:
0 Helpful
5 Replies 5

pompeychimes
Level 4
Level 4

‎07-02-2009 06:46 AM

I assume it powers up. Try the AUX port at different speeds. See if you get any characters. If no, take all the modules and flash card out, reset the DRAM and try again.

0 Helpful

mcecilia
Level 1
Level 1
In response to pompeychimes

‎07-05-2009 11:28 PM

Hello,

I have tried with Console and Aux at all the speeds, and nothing comes from the serial port. Of course I have tested my serial. Also I have removed cards and so on, and the router remains the same. The only thing I am sure that works are the fans. Any more idea (a jumper or something like that)?

0 Helpful

mcecilia
Level 1
Level 1
In response to jimmysands73_2

‎07-06-2009 02:19 AM

Hello,

Only A light in fastethernet 1 is on, all others (power and so on) are off.

It seems that a board is broken. Many thanks.

0 Helpful

pompeychimes
Level 4
Level 4
In response to mcecilia

‎07-06-2009 09:04 AM

Sounds like its ready for a dirt nap.

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card