07-02-2009 06:24 AM - edited 03-04-2019 05:18 AM
Hello,
I have received a 2811 from a lab, and now it does not shows the boot process, nor the rommon, and does not respond to anything. I have tried with all the console speeds.
Any idea??
thanks
07-02-2009 06:46 AM
I assume it powers up. Try the AUX port at different speeds. See if you get any characters. If no, take all the modules and flash card out, reset the DRAM and try again.
07-05-2009 11:28 PM
Hello,
I have tried with Console and Aux at all the speeds, and nothing comes from the serial port. Of course I have tested my serial. Also I have removed cards and so on, and the router remains the same. The only thing I am sure that works are the fans. Any more idea (a jumper or something like that)?
07-06-2009 12:03 AM
Do you get any LEDs displayed?
http://www.cisco.com/en/US/docs/routers/access/2800/hardware/installation/guide/07_hw.html
07-06-2009 02:19 AM
Hello,
Only A light in fastethernet 1 is on, all others (power and so on) are off.
It seems that a board is broken. Many thanks.
07-06-2009 09:04 AM
Sounds like its ready for a dirt nap.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide