shillyar Thu, 07/02/2009 - 22:25
User Badges:
  • Cisco Employee,


pt 2 pt can only dial 1 site

P2 to multipoint you can dial multiple #'s and multiple sites at the same time with dialer profiles.

Thx Steve

paolo bevilacqua Fri, 07/03/2009 - 11:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You might be referring to ISDN BRI.

point to point allows a single device connected to the NT with a static TEI.

point to multipoint allows multiple device, each one with a TEI assigned by the switch.


This Discussion