07-02-2009 09:35 PM - edited 07-03-2021 05:47 PM
Hi Guys,
I have problem for Auto RF.I have environment with 40 AP 1131AG,WLC 4402-50AP using 4.2.130.
Problem:AP no Auto Power the controller set Level power to Maximum. AP to AP interval 10 m of no obstruction.
I config Auto RF by Default
Can you help me to explain the problem
07-03-2009 10:16 AM
Depending where the ap's are placed and how many ap's can be heard at a given ap location, RRM adjusts the power of the access points only when an access point sees the 3rd neighbor at -65 dbm or greater. It is possible that the 3rd ap signal is not strong enough to trigger RRM TX power.
07-04-2009 09:04 AM
Fella5 is correct, I just want to point out however in your environment it would be -70dbm or greater because of the code you're running.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide