cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
270
Views
0
Helpful
1
Replies

tdm gateway modem passthrough

v_bashaev
Level 1
Level 1

Hi! The problem is the following: the customer had a TDM PBX connected to PSTN through E1 PRI. After implementing IP-telephony we installed Cisco3825 with 2 PRIs on vwics (1st facing PSTN, 2nd facing local PBX) to host applications and allow PSTN access from voip peers. The problem is that modem calls from modems attached to PBX towards PSTN have become unstable, loosing connection after ~1 min. Gateway sees it as normal clearing on local modem side. In this case gateway 3825 simply switches calls from one PRI to the other, but it brings in this problem. What could be done to solve it? There is no modem detection implemented anywhere now and I don't know why adding one voice switch could lead to that. Any suggestions would be appreciated.

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Duplicate thread already replied.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: