Noob InterVLAN routing Question

Answered Question
Jul 3rd, 2009
User Badges:

Hello All,



If I have several VLANS configured on Layer 2 switches, a firewall in front on the network and then a router in fron of the firewall how do I then get routing going in between VLANS? The firewall is doing natting at present. Thanks in advance. All replies rated!

Correct Answer by Jon Marshall about 7 years 8 months ago

Angel


So does your network look like


2950 -> firewall -> router


If so you can either


1) run the firewall in transparent mode and route the vlans off the router


2) route the vlans off the firewall


Jon


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Fri, 07/03/2009 - 05:11
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Angel


So does your network look like


2950 -> firewall -> router


If so you can either


1) run the firewall in transparent mode and route the vlans off the router


2) route the vlans off the firewall


Jon


Actions

This Discussion