PLZ HELP!!! CUE 7.x with CUCM 6.12

Unanswered Question

Hi there,

My customer has just installed a brand new Cisco 2811 CUE at a remote location. But even though from the CUE i can see the CUE can see the CUCM fine (both Web login + JTAPI App user) account successfully, whenever all the 6 x CTI ports on CUCM remains un-registered. I have tried rebooted CUE but didn't help. The CUE VG has a "AIM-CUE" module for CUE.

On the CUE, when i clicked under System > CTI ports, i get the following error:

"No CTI ports configured."

And under the CUE "Import CTI sub-screen", i see the following error:

"IOException: Error while determining CCM version -1"

And on CUE CLI, when i issued the "show ccn status ccm-manager" command, i got the following error:

"JTAPI Subsystem is not registered with any Call Manager"

Would appreciated anyone's help on this, the client has lost ALL Voicemail functionality on their remote location.

The Cisco CallManager version is

I have spent a whole day on this already but couldn't get anywhere so would appreciated your assistance.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Sat, 07/04/2009 - 05:49
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Hunt,

Can you please review the steps in this excellent doc;

CallManager for Cisco Unity Express Configuration Example

Hope this helps!



This Discussion