Solved: cm 5 phones/dn/macs to bat for use with 7

cfajardo1_2 · ‎07-05-2009

-we have cm5.x with around 300 phones deployed..

-now we are having new hardware with cm7.02

i want to achieve the ff

-(do the reverse way actualy) of extracting out from cm5 an excel format for the phones along with the dn as well as macs to be use as bat to the new cm7..

note: cm5 did not used bat at all on their implementation

Rob Huffman · ‎07-05-2009

Hi Celso,

You could use the BAT Export from CUCM 5.x and then Import on CCM 7.x but the .csv files will need to be tweaked. The look and feel of BAT on 7.x versions is a little different so you would have to experiment with what fields need to change before the actual Import is done.

Cisco Unified CallManager Bulk Administration Guide, Release 5.1(3)

Exporting Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/5_1_3/t03phexp.html

Cisco Unified Communications Manager Bulk Administration Guide 7.0(1)

Inserting Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_0_1/t03inph.html

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎07-05-2009