Configuring FXO card in CME 4.1

Unanswered Question
Jul 5th, 2009
User Badges:

I am having trouble getting inbound dialing working on an FXO card. I only get a sigle ring on the inbound call and then a disconnect and dialtone. Is there a sample config of having an inbound number ring through to a phone that i can use as reference?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
abdulrahmancisco Mon, 07/06/2009 - 01:03
User Badges:

For configuring FXO you need to set; at a minimum, the call progress tone specific for your country.

For example if you are in Great Briton:

voice-port 0/0/0

cptone gb

For sending all incoming calls on a voice port directly to an extension 222, you can use plar.

voice-port 0/0/0

connection plar 222

Hope this helps.


This Discussion