SIP Authentication - STATIC IP

Unanswered Question
Jul 6th, 2009
User Badges:

I am trying to dig around and locate a guide on using no user/pass for SIP outbound dial dialing. Inbound dialing is working good at the moment but when I try to dial outbound, I am trying to authorize, at least that's what my SIP provider is telling me. Is it possible in CME to accomplish this?


Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
KonradStepniewski Mon, 07/06/2009 - 07:12
User Badges:
  • Silver, 250 points or more

You need to register to your SIP provider with user and password. Try to use something like:


sip-ua

credentials username xxx password yyy realm sip.provider.net

authentication username xxx password yyy

registrar dns:sip.provider.net expires 3600

sip-server dns:sip.provider.net


I assume you have dial-peers configured for outband traffic.


natedog Mon, 07/06/2009 - 07:57
User Badges:

Thanks but I just got to the bottom of this. What I ended up doing was removing all of the SIP-UA info, that's only needed if you are passing a user/pass. My SIP provider is looking at IP only.


On my dial peers I had to force the sip-target to the dns:xx.x.x.com instead of using sip-register.


Thanks for passing along the info.

Actions

This Discussion