cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
286
Views
0
Helpful
1
Replies

IPSEC Issue

bethamprashanth
Level 1
Level 1

Hi experts,

I have designed lab setup for IPSEC VNP before getting it for real time deployment.

under testing Ive noticed few thing:

scenario:

--lan--1841 R1-- X-cable--1841 R2 --Lan

1. my tunnel always remains in QM_IDLE state even after removing x-cable

2. I cant run dynamic routing protocol, so i used static routes, is it GRE is only solution.

3. some say that u can establish vpn using loopback interface,

can some say what is the advantage of it,

and how do i implement

Thanking you,

Prashanth

1 Reply 1

Collin Clark
VIP Alumni
VIP Alumni

1. Try turning on DPD

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtdpmo.html

2. Using a cross-over cable you should be able to use an IGP. Once deployed though you'll have to use GRE.

3. I have never heard of loopbacks terminating VPN's and I really don't see any benefits of it.

Hope this helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: