07-06-2009 07:02 AM - edited 03-11-2019 08:51 AM
All,
I'm going to have a second ASA 5550 at a DR site. Is it going to be possible to set this up where when I make a change on my main firewall, have that change replicated to the other ASA? I know I would be able to do this with a active/standby failover, but they're not going to be on the same subnet so I'm thinking it's not possible.
Thanks,
John
07-06-2009 07:13 AM
Try LAN based failover/replication.
HTH>
07-06-2009 07:15 AM
Try LAN based failover/replication.
HTH>
07-06-2009 07:15 AM
Try LAN based failover/replication.
HTH>
07-06-2009 07:17 AM
John-
A cool feature, but not yet available. You could write some PERL scripts to look for the syslog message, grab the running config and then dump it to the other FW. Not pretty, but should be do-able if you're good with PERL or some other language.
Hope that helps.
07-06-2009 07:39 AM
Thanks all. I'll look into the Perl script. I may be able to do it with an expect script also. :) This is a tricky situation because I don't want the ASA to failover if our local ASA dies, and I'm only wanting a way to replicate changes.
Thanks,
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide