Unable to collect inventory cat6509-v-e LMS3.2/RME43

Answered Question

Am unable to successfully collect inventory from from my cat6509-v-e running 12.2(33)SXI with either LMS 3.1 or 3.2. Am able to collect inventory form other devices so it is something specific to this device type or IOS version. Would appreciate any troubleshooting ideas. Have included the section of the IC_Server.log for this device.


Thanks in advance



Correct Answer by Joe Clarke about 8 years 3 weeks ago

Inventory collection in LMS 3.1 with SXI is broken. However, this should work in LMS 3.2. The problem you're seeing here is due to an SNMP timeout polling the CISCO-FLASH-MIB. Just increase the SNMP timeout from 2 seconds to 10 seconds for this device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Mon, 07/06/2009 - 11:59
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Inventory collection in LMS 3.1 with SXI is broken. However, this should work in LMS 3.2. The problem you're seeing here is due to an SNMP timeout polling the CISCO-FLASH-MIB. Just increase the SNMP timeout from 2 seconds to 10 seconds for this device under RME > Devices > Device Management > RME Devices > Edit Device Attributes.

Actions

This Discussion