remote desktop vpn client to site

Unanswered Question
Jul 7th, 2009
User Badges:


we have an ASA 8.0 in the HQ and a remote client connected to the HQ in VPN with cisco vpn client 4.6 and we need to access from the internal lan to the remot client by remote desktop. We have always the same error: "authorization denied (ACL=acl name) for user=<unknown> from SOURCE IP to DESTINATION IP".

In the acl we permit the connection between the two addresses but we can manage to insert user option...anyone can help us? thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
owillins Mon, 07/13/2009 - 12:55
User Badges:
  • Silver, 250 points or more

This error message states the access list check failed; either it matched a deny, or it matched nothing, such as an implicit deny. Connection denied by user access list acl_ID, which was defined per the AAA authorization policy on CiscoSecure ACS. This message works only with RADIUS protocol.

stefanotiburzi Tue, 07/14/2009 - 01:07
User Badges:

Sorry, but I didn't understand. We didn't have any ACS and we didn't defined any AAA policy. The user is a local user and the problem is exactly this:how is possible that from the internal lan to the remote client I need a user authorization for the remote desktop?thank you very much for your interesting..


This Discussion