QoS show commands in Cat4500

Unanswered Question
Jul 7th, 2009
User Badges:

Hi


Is there any show commands in Catalyst 4500 that can see we can use to see queuing statistics, e.g, counters to show how many packets are dropped/queued in a particular queue?


So far i only see

show qos

show qos dbl

show qos interface

show qos maps


which does not show what i wanted to see.


Any idea?


Thanks

Eng Wee

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
e-chuah Tue, 07/07/2009 - 05:39
User Badges:

HiEdison,


Thanks for the reply. But it looks like it is only applicable when u use policing. If i have the below auto-qos config that does only queueing, does the show policy-map command still provide the same output? (sorry, i do not have a cat4500 to try it out right now)


policy-map autoqos-voip-policy

class class-default

dbl


interface GigabitEthernet3/1

service-policy output autoqos-voip-policy

qos trust cos

auto qos voip trust

tx-queue 1

shape percent 10

tx-queue 3

priority high

shape percent 33


Thanks for your help.

Rgds

Eng Wee


Edison Ortiz Tue, 07/07/2009 - 05:49
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

The commands you posted along with 'show policy-map interface' are the only commands available for QoS troubleshooting in the 4500. Since most switches employ Hardware-Based QoS, granular information will be missing from its statistics.



__


Edison.

jedellerby Fri, 11/06/2009 - 01:21
User Badges:

Hi,


The commands I use on a 4500 for checking QoS counters/general QoS info are:


show interface counter all module x

show interface x/y counter detail

show platform hardware qos interface gigabitEthernet x/y

show qos int x/y


These should give you the QoS counters showing per queue counters, per queue drops and DBL drops when DBL is enabled,


Jed


Actions

This Discussion