Cisco IOS XR commands for aggregate addressing

Answered Question
Jul 7th, 2009
User Badges:

Can someone who knows IOS XR help me with creating the equivalent for this? I have this programmed in IOS:



route-map KMA-AGGS permit 10

set community 20115:3000 20115:63004


router bgp 99999

aggregate-address 10.158.32.0 255.255.240.0 route-map KMA-AGGS


What would this look like in IOS XR?


Thanks for the help!

Correct Answer by ananshah about 7 years 9 months ago

Hello David :


conf t

router bgp 9999

address-family ipv4 unicast

aggregate-address 10.158.32.0/20 route-policy KMA-AGGS

exit

exit

------make sure you are in global config mode---

route-policy KMA-AGGS

set community (20115:3000)

set community (20115:63004) additive

exit

commit



Not sure if this would help but tried my best :)


http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.4/routing/configuration/guide/rc34bgp.html

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
ananshah Wed, 07/08/2009 - 02:17
User Badges:
  • Cisco Employee,

Hello David :


conf t

router bgp 9999

address-family ipv4 unicast

aggregate-address 10.158.32.0/20 route-policy KMA-AGGS

exit

exit

------make sure you are in global config mode---

route-policy KMA-AGGS

set community (20115:3000)

set community (20115:63004) additive

exit

commit



Not sure if this would help but tried my best :)


http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.4/routing/configuration/guide/rc34bgp.html

Correct Answer
ananshah Wed, 07/08/2009 - 02:20
User Badges:
  • Cisco Employee,

Hello David :


conf t

router bgp 9999

address-family ipv4 unicast

aggregate-address 10.158.32.0/20 route-policy KMA-AGGS

exit

exit

------make sure you are in global config mode---

route-policy KMA-AGGS

set community (20115:3000)

set community (20115:63004) additive

exit

commit



Not sure if this would help but tried my best :)


http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.4/routing/configuration/guide/rc34bgp.html

Actions

This Discussion