07-08-2009 12:39 AM - edited 03-15-2019 06:51 PM
CME 7.1 (12.4.22YB3), with extension mobility enabled.
An octo-line ephone-dn shared amongst 4 users, the state of CFNA, CFA or CFB from the user's GUI interface can't be changed.
!
voice user-profile 22
user 8422 password 12345
number 1001,1000 type normal
!
ephone-dn 2 octo-line
number 1000
label IT Operations 1000
name IT IT
corlist incoming Restricted
!
ephone-dn 22 dual-line
number 1001
pickup-group 200
label John Smith
name John Smith
call-forward busy 1999
call-forward noan 1999 timeout 15
corlist incoming Unrestricted
!
The user is able to change the CFA from their phone.
07-08-2009 01:29 AM
Contact TAC, ask to reproduce, file a bug as necessary or provide a solution.
07-08-2009 06:51 AM
I know that the GUI has not been updated for octo-lines and some of the CME 7.0/7.1 features. This functionality was being ported over to CCP (cisco configuration professional).
Your mileage may vary with trying to have new things added to the CME GUI.
It's worth a TAC case, but thought I would give you fair warning.
-nick
07-08-2009 07:33 AM
Thing is, as much the CME GUI is deprecable, it gives the only known way for an user to CFA a phone without accessing it physically.
I do not see CCP as a valid replacement for that (admittedly I never used it).
07-08-2009 11:47 AM
This is probably true.
(I've admittedly used the GUI and CCP about once each).
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: