07-08-2009 01:33 AM - edited 03-15-2019 06:51 PM
I uploaded phones to CCM using BAT. after adding them I found that I did not add the CSS for forward All. and the users have different CSS and I need the same CSS assigned to the line to be assigned to the Forward all CSS.
one more thing I need to add voice mail profile for all users and add the features forward no answer to all phones to be forwarded to voice mail
Solved! Go to Solution.
07-08-2009 05:57 AM
Hi Madi,
Have a look at this section within BAT that is used for this purpose (Update Lines) :)
Cisco Unified Communications Manager Bulk Administration Guide 7.0(1)
Adding and Updating Lines for Phones
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_0_1/t03uplns.html
Hope this helps!
Rob
07-08-2009 05:57 AM
Hi Madi,
Have a look at this section within BAT that is used for this purpose (Update Lines) :)
Cisco Unified Communications Manager Bulk Administration Guide 7.0(1)
Adding and Updating Lines for Phones
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_0_1/t03uplns.html
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: