VLAN Trunking Questions

Answered Question
Jul 8th, 2009

sh interfaces switchport


On my access ports I see the following:

Access Mode VLAN: 96 (switch name)

Trunking Native Mode VLAN: 1 (default)


Now the trunk port shows the following:

Access Mode VLAN: 1 (default)

Trunking Native Mode VLAN: 50 (NATIVE_VLAN)


Do I have a misconfiguration on the access ports or is this the way it should display?

Correct Answer by Giuseppe Larosa about 7 years 7 months ago

Hello Jason,

>> Do I have a misconfiguration on the access ports or is this the way it should display?


the access port is in vlan 96 and has native vlan 1 if it were a trunk.


the trunk port has native vlan 50 and if the mode would be access it would be in vlan1 (default).


All this looks like possible and correct


Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Wed, 07/08/2009 - 06:03

Hello Jason,

>> Do I have a misconfiguration on the access ports or is this the way it should display?


the access port is in vlan 96 and has native vlan 1 if it were a trunk.


the trunk port has native vlan 50 and if the mode would be access it would be in vlan1 (default).


All this looks like possible and correct


Hope to help

Giuseppe


Actions

This Discussion