Issues with a MFT Controller Card in UC500

Unanswered Question

I have a vwic-1MFT controller card.  I install it into the UC500 but I cannot configure it?  I do a sh inventory and it is not listed there.

I can do a show controller T1 but in config t mode I do not have controller as an option.  Does anyone know if the controller card is not supported in this IOS?

System image file is "flash:uc500-advipservicesk9-mz.124-24.T.bin"

I also tried a working IOS from another UC500 box uc500-advipservicesk9-mz.124-11.XW7.bin

I also installed the card into another router and that router sees the card etc.

Could the UC500 box be bad or have a bad port or am I missing something to enable that card for the first time?

I have had this problem before.  Please let me know if it is an IOS issue or if there is something else I am doing wrong.

Thanks

Todd

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion