cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
339
Views
0
Helpful
2
Replies

How do I configure callmanager or GW H323 to offer busy tone to carrier?

chavez.israel
Level 1
Level 1

When our faxes receive a second call while busy, the second call overflows to our POTS lines. According to the carrier that happens becuase we are sending a cause code 17 to them which triggers the overflow feature over our ISDN Pri lines. Per the carrier to avoid triggering the overflow we need to send a cause code 31, or some release alert to not trigger the overflow.

In accordance with Cisco TAC the cause code cannot be changed on an H323 GW.

Is there a way to configure callmanager or the GW H323 with a work around that will either send a busy signal to the carrier, or have the system provide a busy signal on the second line?

2 Replies 2

guy.richard
Level 1
Level 1

Hi,

Which type of H323 gateway are your faxes connected to ?

Did you configured "hunt-stop" on your pots dial-peers to prevent to overflow

Maybe you can add "max-conn 1" command on either voip dial-peers.

Hope that helps

Guy

chavez.israel
Level 1
Level 1

Thank you for taking your time to help me.

Use ATA's, connected to VG224's. Our PRI's are on 2851's...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: