strange RIP issue

kevin.shi · ‎07-08-2009

please see below output, default route stuck in VPN routing table for 15:46:40 although the ' Hold down timer expires in 0 secs'. has anyone expirienced this problem? is this normal practice on Cisco router? thanks

r0#sh ip ro vrf 504-ten 0.0.0.0

Routing entry for 0.0.0.0/0, supernet

Known via "rip", distance 120, metric 4294967295 (inaccessible), candidate default path

Redistributing via rip, bgp 65500

Advertised by rip (self originated)

bgp 65500 route-map weight-0-local-pref-800

Last update from 10.250.41.86 on Serial1/0.1/1/6/3:0, 15:46:40 ago

Hold down timer expires in 0 secs

guruprasadr · ‎07-09-2009

HI Kevin,

Can you post 'show ip rip database' will help watch the information.

In a normal scenario, The route will remain as "inaccessible" until the flush timer expires. Then it's gone...

Best Regards,

Guru Prasad R.

kevin.shi · ‎07-09-2009

thanks for your input.

I have reset RIP config, because it was affecting service for 15 hours.

flush timer is 240 secs. The route was not gone as expected. is it a bug?

r0#sh ip pro vrf 504-ten

Routing Protocol is "rip"

Outgoing update filter list for all interfaces is 59

Incoming update filter list for all interfaces is not set

Sending updates every 30 seconds, next due in 20 seconds

Invalid after 180 seconds, hold down 180, flushed after 240

Redistributing: static, rip, bgp 65500