Configuring Multicasting on ASA5520

Unanswered Question
Jul 8th, 2009
User Badges:

Hi,


I'm trying to allow multicast traffic on my Cisco ASA5520 and followed the sample configuration from this link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807631d2.shtml


Unfortunately, I'm getting this error from the logs:


Jul 09 2009 13:55:10: %ASA-3-106010: Deny inbound protocol 2 src outside:<RP IP address> dst identity:224.0.0.2


Would you know why this is happening?


Thanks,

Pat

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
patricia20 Thu, 07/09/2009 - 13:29
User Badges:

Hi Andrew,


Thanks for your reply. Multicast routing is enabled on the FW via this command 'multicast-routing'. Is there a separate command to enable IGMP?


Thanks,

Pat

patricia20 Thu, 07/09/2009 - 13:57
User Badges:

Also, just to clarify, I'm trying to enable a PIM sparse mode with a single RP.


Thanks!

Actions

This Discussion