cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1341
Views
0
Helpful
4
Replies

Configuring Multicasting on ASA5520

patricia20
Level 1
Level 1

Hi,

I'm trying to allow multicast traffic on my Cisco ASA5520 and followed the sample configuration from this link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807631d2.shtml

Unfortunately, I'm getting this error from the logs:

Jul 09 2009 13:55:10: %ASA-3-106010: Deny inbound protocol 2 src outside:<RP IP address> dst identity:224.0.0.2

Would you know why this is happening?

Thanks,

Pat

4 Replies 4

andrew.prince
Level 10
Level 10

Protocol number 2 is IGMP, make sure you have enabled IGMP and Multicast Routing.

Hi Andrew,

Thanks for your reply. Multicast routing is enabled on the FW via this command 'multicast-routing'. Is there a separate command to enable IGMP?

Thanks,

Pat

Also, just to clarify, I'm trying to enable a PIM sparse mode with a single RP.

Thanks!

OK - the original post included a deny on the firewall, 1 - it was the IGMP protocol, 2 - the desintation address was multicast all routers. What application are you trying to multicast thru the firewall?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: