cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
0
Helpful
1
Replies

websense with DMZ workstations issue

mohamed_makled
Level 1
Level 1

Hi

i have ASA 5520 with 3 interfaces : inside , DMZ , outside . on the inside network , we have websense server (10.0.10.5) . For the inside users , the websense is working fine . On the DMZ interface that is configured for the guests only , the websense is not working.

Guests subnet is : 10.0.16.0/24

the following is configuration on the firewall :

nat (Wireless-Guest) 2 10.0.16.0 255.255.255.0

global (outside) 2 64.x.x.x

static (inside,Wireless-Guest) 10.0.10.0 10.0.10.0 netmask 255.255.255.0

access-list acl-guest extended permit ip any any

access-group acl-guest in interface Wireless-Guest

dhcpd address 10.0.16.10-10.0.16.200 Wireless-Guest

dhcpd dns 212.x.x.2 212.x.x.3 interface Wireless-Guest

dhcpd enable Wireless-Guest

please advice

regards

1 Reply 1

Hi Mohammed,

Can you please post the output of 'show run | in url'. That will help us diagnose this issue.

-Mike

Review Cisco Networking products for a $25 gift card