07-09-2009 02:53 AM - edited 03-06-2019 06:39 AM
Hi all I have a problem with my print server losing connection to any remote sites, but locally its fine. it sits on an IBM blade server. One strange thing is that if I clear off the arp cache and mac address table for the vlan its on from the default multilayer switch, I can then ping it from remote sites again
Any ideas what this could be
07-09-2009 09:41 AM
Are you running any first hop redundancy protocols?
HSRP,GLBP between your switches or routers?
07-10-2009 12:47 AM
Hi there
Yes I am running VRRP
why, would this cause issue ?
07-10-2009 05:44 AM
Could very well be if its not stable. Make sure both devices have routes to the remote sites. Look at when the last state change was for the vrrp group. Let me know if you see anything. If you could post the output of the vrrp set up so I could take a look.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide