Help Address Question

Answered Question
Jul 9th, 2009
User Badges:
  • Blue, 1500 points or more

Sorry, but I dont have access to my lab.


What source address does an interface use when sending a DHCP unicast to a DHCP server?


int gi1/1

ip address 10.10.10.1 255.255.255.0

ip helper-address 4.4.4.4



Whats the source address of the DHCP unicast?


What about if I had a secondary address?


int gi 1/1

ip address 20.20.20.1 255.255.255.0 secondary

ip address 10.10.10.1 255.255.255.0

ip helper-address 4.4.4.4



Thanks


Victor

Correct Answer by Jon Marshall about 7 years 10 months ago

Victor


Had a few spare minutes :-)


It uses the primary address of the interface ie. in your example 10.10.10.1


With a secondary address it still uses the primary address of the interface ie. 10.10.10.1


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (3 ratings)
Loading.
John Blakley Thu, 07/09/2009 - 12:40
User Badges:
  • Purple, 4500 points or more

Victor,


I believe the primary will always be used as the source.


HTH,

John

lamav Thu, 07/09/2009 - 12:54
User Badges:
  • Blue, 1500 points or more

Thats what I think, too...but I need it confirmed...maybe someone can set it up in their lab right quick....I dont have acces to mine now and dont do the nips, dips or whatever that virtual service is called.

Correct Answer
Jon Marshall Thu, 07/09/2009 - 13:39
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Victor


Had a few spare minutes :-)


It uses the primary address of the interface ie. in your example 10.10.10.1


With a secondary address it still uses the primary address of the interface ie. 10.10.10.1


Jon

lamav Thu, 07/09/2009 - 13:57
User Badges:
  • Blue, 1500 points or more

Johnny Boy!!!!!



What it is, homeboy???


Long time...


You ARE the best, papi chulo....


Thanks


Victor

Actions

This Discussion