07-09-2009 01:30 PM - edited 03-15-2019 06:54 PM
Hi Can I please obtian a smaple config for a 2851 Router acting as a voice gate way for Call Manager 5.1. I will prefer it to be based on Australia Standards. thanks Robert
07-09-2009 03:29 PM
Depends if you want h323 or MGCP operation.
MGCP is preferable as the configuration is simpliifed and you don't need to configure the dial plan on the router.
Australia uses Euro ISDN, so the switch type is primary-net5
Here is a link on the gateway and CUCM configuration -
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml
If you are using an Onramp 10 or 20 fractional service , we need to busy out the unusued B channels as well. Let me know if this is the case and I can provide additional details.
07-13-2009 09:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide