Multiple peer in single vpn config - Cisco PIX

Unanswered Question
Jul 9th, 2009
User Badges:
  • Silver, 250 points or more

I have Cisco Pix 515E ver 7.2, below is the configuration i have set to acheive vpn failover even if one ISP fails, but this doesn't work. All it works only if i put in bi-directional irrespective of any 1 IP I have in that. Any suggestion?



crypto map pix-to-pix 36 match address Anand

crypto map pix-to-pix 36 set connection-type originate-only

crypto map pix-to-pix 36 set peer 1.1.1.1 2.2.2.2

crypto map pix-to-pix 36 set transform-set ESP-3DES-MD5


tunnel-group 1.1.1.1 type ipsec-l2l

tunnel-group 1.1.1.1 ipsec-attributes

pre-shared-key 123456


tunnel-group 2.2.2.2 type ipsec-l2l

tunnel-group 2.2.2.2 ipsec-attributes

pre-shared-key 123456

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion