Syslog message LMS 2.6

Unanswered Question
Jul 9th, 2009
User Badges:

Hi All,


My present task that I need to get some of the configured devices syslog details from CiscoWorks.

I have configured for this under RME ->Administration->Syslog->Purge Policy for daily

But I am not receiving the device syslog details.

I am looking to get the day to day device syslog details as like below from CiscoWorks.

My Ciscoworks is LMS 2.6 & RME 4.0.6


07-10-2009 07:26:58 Local7.Warning 10.40.1.1 132338: .Jul 10 07:42:58.430: %IP-4-DUPADDR: Duplicate address 68.67.0.123 on FastEthernet4, sourced by 0019.3037.4598

07-10-2009 07:26:56 Local7.Info 10.30.1.1 12006864: 1y42w: %SEC-6-IPACCESSLOGRL: access-list logging rate-limited or missed 106 packets

07-10-2009 07:26:56 Local7.Info 10.50.2.2 12006863: 1y42w: %SEC-6-IPACCESSLOGP: list 175 permitted tcp 10.28.2.84(2494) -> 10.30.2.142(1087), 1 packet

07-10-2009 07:26:56 Local7.Notice 10.20.1.1 182375: Jul 10 05:26:55.239: %OSPF-5-ADJCHG: Process 1, Nbr 10.30.1.1 on Tunnel0 from DOWN to DOWN, Neighbor Down: Ignore timer expired


Please help me out...


Regards,

Naidu.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
yjdabear Fri, 07/10/2009 - 04:41
User Badges:
  • Gold, 750 points or more

Not sure how Purge Policy has to do with what you're trying to accomplish, but are these devices (e.g. 10.40.1.1) managed as "normal devices" in RME?

ilnaiduccna Fri, 07/10/2009 - 05:18
User Badges:


Hi yjdabear,


Yes those are managed devices in RME and able to config fetch also.


Regards,

Naidu.

yjdabear Fri, 07/10/2009 - 05:56
User Badges:
  • Gold, 750 points or more

Naidu,


What OS is your LMS running on?


Are other managed devices showing up in RME Syslog Report fine?

Actions

This Discussion