Syslog message LMS 2.6

ilnaiduccna · ‎07-09-2009

Hi All,

My present task that I need to get some of the configured devices syslog details from CiscoWorks.

I have configured for this under RME ->Administration->Syslog->Purge Policy for daily

But I am not receiving the device syslog details.

I am looking to get the day to day device syslog details as like below from CiscoWorks.

My Ciscoworks is LMS 2.6 & RME 4.0.6

07-10-2009 07:26:58 Local7.Warning 10.40.1.1 132338: .Jul 10 07:42:58.430: %IP-4-DUPADDR: Duplicate address 68.67.0.123 on FastEthernet4, sourced by 0019.3037.4598

07-10-2009 07:26:56 Local7.Info 10.30.1.1 12006864: 1y42w: %SEC-6-IPACCESSLOGRL: access-list logging rate-limited or missed 106 packets

07-10-2009 07:26:56 Local7.Info 10.50.2.2 12006863: 1y42w: %SEC-6-IPACCESSLOGP: list 175 permitted tcp 10.28.2.84(2494) -> 10.30.2.142(1087), 1 packet

07-10-2009 07:26:56 Local7.Notice 10.20.1.1 182375: Jul 10 05:26:55.239: %OSPF-5-ADJCHG: Process 1, Nbr 10.30.1.1 on Tunnel0 from DOWN to DOWN, Neighbor Down: Ignore timer expired

Please help me out...

Regards,

Naidu.

yjdabear · ‎07-10-2009

Not sure how Purge Policy has to do with what you're trying to accomplish, but are these devices (e.g. 10.40.1.1) managed as "normal devices" in RME?

ilnaiduccna · ‎07-10-2009

Hi yjdabear,

Yes those are managed devices in RME and able to config fetch also.

Regards,

Naidu.

yjdabear · ‎07-10-2009

Naidu,

What OS is your LMS running on?

Are other managed devices showing up in RME Syslog Report fine?