wireless control system (wcs)

Unanswered Question
Jul 9th, 2009

Hi

can you help me out with the following error msg: please advice what can i do to resolve this...

AP 'atn-ij-ap', interface '802.11b/g' on Controller '12.2.3.4'. Channel changed to '6' from '1' due to 'Interference'. Interference Energy before update is '-58' and after update is '-79'. Noise before update is '-82' and after update is '-80'. Interference before update is '-58' and after update is '-88'.

what is the acceptable level of interference?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Lucien Avramov Fri, 07/10/2009 - 10:16

Noise : should be less than -90 dbm (default value for background noise). -82 is a bit too high.

We recommend the default threshold to be -70 for noise.

Interference : it should be less than 10% of the channel utilization.

You can modify those thresholds on the WLC GUI : Wireless -> 802.11b/g (or a) -> RRM -> General

Actions

This Discussion