×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IPMA with 7921

Unanswered Question
Jul 10th, 2009
User Badges:

Is it possible to use a 7921 as Assistant Phone in IPMA?

I'm running CUCM 7.0, was able to assign the Default Assistant Softkeytemplate, but it's not possible to assign the 7921 within the IPMA configuration of the user.


Regards

Peter

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Rob Huffman Fri, 07/10/2009 - 04:54
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Peter,


Here is the related info :)


The following phones that are running SCCP support Cisco Unified Communications Manager Assistant:


•Cisco Unified IP Phone 7970/71


•Cisco Unified IP Phone 7960/61


•Cisco Unified IP Phone 7940/41



http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsipma.html



Hope this helps!

Rob

Actions

This Discussion