i do a sh users, we have 16 connected vty users. We use Radius authentication on the switch. the disconnect command is not working. Anyone have any suggestions..
CTYSTSWTXXX#
CTYSTSWTXXX#sh users
Line User Host(s) Idle Location
1 vty 0 idle 1y45w 172.19.30.100
2 vty 1 idle 1y34w 172.19.30.100
3 vty 2 lab idle 1y39w 172.19.30.100
4 vty 3 lab idle 1y30w 172.19.30.100
5 vty 4 lab idle 1y26w 172.19.30.100
6 vty 5 example idle 1y2w 172.19.30.100
7 vty 6 idle 42w3d 172.19.30.100
8 vty 7 idle 42w2d 172.19.30.100
9 vty 8 example idle 40w4d 172.19.30.100
10 vty 9 example idle 40w3d 172.19.30.100
11 vty 10 example idle 39w2d 172.19.30.100
12 vty 11 idle 34w0d 172.19.30.100
13 vty 12 example idle 23w3d 172.19.30.100
14 vty 13 example idle 20w1d 172.19.30.100
15 vty 14 example2 idle 17w2d 172.19.30.100
* 16 vty 15 example3 idle 00:00:00 172.19.30.100
Interface User Mode Idle Peer Address
CTYSTSWTXXX#disco
CTYSTSWTXXX#disconnect ?
<0-0> The number of an active network connection
WORD The name of an active network connection
ssh Disconnect an active SSH connection
<cr>
CTYSTSWTXXX#disconnect 1
?Invalid connection name
CTYSTSWTXXX#disconnect 11
?Invalid connection name
CTYSTSWTXXX#
CTYSTSWTXXX#disconnect ssh vty 1
% VTY2 is not a SSH connection
