Jaime Valencia Fri, 07/10/2009 - 11:09

You can refer to one of the thousands of posts with the exact same question that exist in NetPro


IP Telephony: Blocking incoming numbers on voice gateway CUCM 5

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd4043c


I'm just posting one but there are way too many post for this same question, PLEASE try searching NetPro for answers.


HTH


java


if this helps, please rate

hippieboy9 Fri, 07/10/2009 - 12:30

I already saw this. I was looking for a way to do it with MGCP but it looks like there is no way. I hope Cisco will add that in a future update.


Thanks.

James Hawkins Sun, 07/12/2009 - 13:22

For MGCP I normally use a translation pattern that matches on the calling number and translates the called number to a CTI Route Point configured to forward all calls to a Unity Mailbox with a greeting stating something like "Unsolicited calls are not welcome"

Actions

This Discussion