07-10-2009 11:44 AM - edited 03-06-2019 06:41 AM
Can I bond two ports together on a switch and then make those an L3 interface (i.e. no switchport)? This is basically for redundancy if one port should fail.
07-10-2009 11:48 AM
Yes, see:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swethchl.html#wp1404590
HTH,
__
Edison
07-10-2009 11:49 AM
You can use layer 3 etherchannel.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/channel.html#wp1020436
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
