Mobile Voice Access

Unanswered Question
Jul 10th, 2009
User Badges:

When configuring Mobile voice access, after I follow the configuration, and I try to dial the number that I assigned for mobile access i get the following error



108282: Jul 10 20:04:56.200: %CALL_CONTROL-6-APP_NOT_FOUND: Application cmm in dial-peer 4143 not found. Handing callid 115013 to the alternate app .


108283: Jul 10 16:04:56.212: ISDN Se0/3/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x9B6A

Cause i = 0x80BF - Service/option not available, unspecified




Does anybody knows where to get from the VXM script for this application?


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Thu, 07/16/2009 - 05:59
User Badges:
  • Silver, 250 points or more

This may be because the inbound dial peer is pointing to an unavailable application. The call is being handed to the alternate application or is rejected. So try to reconfigure the dial peer to have a valid application name, or verify that the application is accessible at its location.

jpherna29 Thu, 07/16/2009 - 07:10
User Badges:

Yes. You were right.


had a typo on my dial-peer config…



I had configured



application


service ccm http://10.120.1.11:8080/ccmivr/pages/IVRMainpage.vxml


!



My dial peer config was



dial-peer voice 4143 pots


description incoming d-p for Mobile Voice Access service


service cmm ??


incoming called-number 4143


no digit-strip




So I changed it to



dial-peer voice 4143 pots


description incoming d-p for Mobile Voice Access service


service ccm **


incoming called-number 4143


no digit-strip


That did it... Thanks..

Actions

This Discussion