Hi Tervor,
For example our Cisco SPA525G takes around 2 minutes to startup or
restart. Most of the time is spent loading the XML files. I am just
concerned that this is not normal and there may be something wrong with
the network or setup.
Can i ask if you are using the 525 in wireless mode or Wireline mode?
I have seen it take up too 2 minutes in wireless mode, but never seen it take that long in wireline mode.
to debug the tft just do the following at the command line:
1. term mon
2. debug tftp events
Use a program like putty:
http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe
Choose either SSH or Telnet, if you first configured the box using CCA then either of them will be enabled, i prefer SSH myself but that is an each to his own thing.
You can then right click at the top on the barand go to "copy all to clipboard"
It might be a good idea to try and do it when the machine is going to be doing less traffic, it helps with sorting through the log if there is not much activity happening on the system that might appear during that specific debug.
Cheers,
David.
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
