local EAP + stand-alone HREAP ?

Unanswered Question
Jul 11th, 2009

What version of WLC software supports local EAP in stand-alone HREAP mode? Does 4.2M support it? I can't seem to find anything om 5.x/6.x release notes, and can't currently upgrade to test.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Roman Rodichev Sat, 07/11/2009 - 17:24

nevermind, I found my answer, I need 5.0 to support that

Controller software release 5.0.148.0 contains two new hybrid-REAP group features:

Backup RADIUS server-You can configure the controller to allow a hybrid-REAP access point in standalone mode to perform full 802.1X authentication to a backup RADIUS server. You can configure a primary RADIUS server or both a primary and secondary RADIUS server.

Local authentication-You can configure the controller to allow a hybrid-REAP access point in standalone mode to perform LEAP or EAP-FAST authentication for up to 20 statically configured users. The controller sends the static list of usernames and passwords to each hybrid-REAP access point when it joins the controller. Each access point in the group authenticates only its own associated clients. This feature is ideal for customers who migrate from an autonomous access point network to an LWAPP hybrid-REAP access point network and do not need to maintain a large user database nor add another hardware device to replace the RADIUS server functionality available in the autonomous access point.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode