create static route on 4506E to 7200 router

Answered Question
Jul 11th, 2009
User Badges:

I'm having an issue where I can't create an ip address on a switch port for a firewall. I've done it before on a non-HA setup where the connection was made on the core switch directly connected to the router. This time the connection will be on a distribution-layer vtp client switch. There is a staticly-mapped subnet on the router to a virtual address. Every time I want to just create a port with IP Address, it fails why?

Correct Answer by Reza Sharifi about 7 years 11 months ago

Earl,


Did you remeber to do a no switch port on that port to make a routed port?


HTH

Reza

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Reza Sharifi Sat, 07/11/2009 - 17:40
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Earl,


Did you remeber to do a no switch port on that port to make a routed port?


HTH

Reza

Actions

This Discussion