How to Give a name / label to FXO ports ?

Unanswered Question
Jul 12th, 2009
User Badges:

FXO port 0/0/0, label as “A1”

FXO port 0/0/1, label as “A2”

FXO port 0/0/2, label as “A3”


So when incoming call from FXO port 0/0/0 ringing in IP Phone, in IP Phone displayed “A1”


When incoming call from FXO port 0/0/1 ringing in IP Phone, in IP Phone displayed “A2”


Using Call Manager v.7.0


How to configure this ? (MGCP & H.323)

Please help me.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
paolo bevilacqua Mon, 07/13/2009 - 00:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Use "station-id name".

paolo bevilacqua Mon, 07/13/2009 - 01:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Works with H.323. If you're using MGCP, I have no idea if and how it can be done.

susanto.liu Mon, 07/13/2009 - 02:05
User Badges:

So, from You experience, from Router as VG connect to CUCM using H.323, which a station-id was configured in Router, will be shown on IP Phone display when incoming call ?

Thank's for You support.

James Hawkins Mon, 07/13/2009 - 02:19
User Badges:
  • Gold, 750 points or more

For MGCP just set the Display (Internal Caller ID) for the Directory Number within CallManager - just the same as any DN used by IP phones etc.

susanto.liu Mon, 07/13/2009 - 02:29
User Badges:

are You sure? I think, it is caller ID of Extension, for extension call to extension. Not for caller ID of FXO.

paolo bevilacqua Mon, 07/13/2009 - 04:41
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

It should, works with CME for example.

Actions

This Discussion