Line occupying algorythm

Unanswered Question
Jul 12th, 2009
User Badges:

Hi,


Have the IP Phone 7941 working with CUCM 6.x.

Both of two buttons configured with specific DN (line #1 - 101, line #2 - 102).

When I want to make an outbound on/off-net call from this phone I do one of the following:


1) Dial the number at first, then press 'Dial' softkey, the call proceeds.

2) Press 'New Call' softkey, then dial the number, the call proceeds.


In both cases line #1 is occupied by default for making a call.


Is there any method to change this default occupying behaviour in preference to line #2 ?

I mean somehow to reconfigure CUCM to allow both (1) and (2) tries to occupy not #1, but #2 line ?

Of course I can re-bind line-2-dn associations (line #1 - 102, line #2 - 101), but this is not very appropriate to me.


Thank you.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
James Hawkins Mon, 07/13/2009 - 03:20
User Badges:
  • Gold, 750 points or more

To the best of my knowledge line 1 is always the primary line and is automatically selected for outbound calls when using the Dial or New Call softkeys.


I do not believe that it is possible to alter this behaviour.

CHRIS CHARLEBOIS Mon, 07/13/2009 - 10:43
User Badges:
  • Silver, 250 points or more

Best, I think, to approach this from a user training prospective. In method 1, for instance, if the user press the line 2 button, rather than Dial, it will function as you are suggesting.

Actions

This Discussion