Pass VLAN Traffic on Routers

jeffersoncbriones · ‎07-13-2009

Hi Gurus,

what possible technology/configuration to do this, pass a vlan traffic from switch to 2 routers, attached files.

Thanks.

andrew.prince · ‎07-13-2009

Your post is not clear - explain further what you want to do?

jeffersoncbriones · ‎07-13-2009

Hi Andrew,

What i mean is from my 6500 switch, i have a vlan100 and i want this vlan to pass thru my GSR and 7206. its like making the router act as a bridge, sort of IRB. I think its not possible to create a vlan encapsulation on 2 routers p2p.

Thanks.

andrew.prince · ‎07-13-2009

The only way I can think of - is to create dot1q sub-interfaces on the GSR and tag them with vlan 100 - then create a bridge group, and put the sub-interfaces into the bridge group.

jeffersoncbriones · ‎07-13-2009

Hi Andrew,

i will also create a bridge group on the last router?

gsr--subint-vlan100-----subint-vlan100-7206

Something like this?

andrew.prince · ‎07-13-2009

Well from your diagram the 7206 does not need to pass layer 2 vlan 100 traffic out another interface?

jeffersoncbriones · ‎07-13-2009

yes thats the last router and i will just do a routing from there.

andrew.prince · ‎07-13-2009

OK - then try the suggested topology

jeffersoncbriones · ‎07-13-2009

Hi Andrew,

I will try the config and try to test.

THanks.

jeffersoncbriones · ‎07-14-2009

Hi Andrew,

It work well, configured sub-int together with the bride-group without routing. Thanks for your help.

Jeff

andrew.prince · ‎07-14-2009

np - glad to help