ASA rule configuring help

Unanswered Question
Jul 13th, 2009
User Badges:

I need to configure the following rule and need help to configure a ACL:


Server (192.168.254.22)is in the DMZ


From server Port 1521 open only to users inside the xyz domain (not external

users)

From Server Port 80 open to any host (internal and external) And enable internet access from server


XYZ# sh ip address

System IP Addresses:

Interface Name IP address Subnet mask Method

Ethernet0/0 outside 195.8.188.82 255.255.255.240 CONFIG

Ethernet0/1 inside 150.200.200.61 255.255.0.0 CONFIG

Ethernet0/2 dmz 192.168.254.254 255.255.255.0 CONFIG

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kureli Sankar Wed, 07/15/2009 - 18:47
User Badges:
  • Cisco Employee,

We also need the output of


sh run static | i 192.168.254.22


and


sh run access-group


Actions

This Discussion