07-13-2009 06:16 AM - edited 07-03-2021 05:49 PM
I'd like to create a self-signed cert on an Aironet 1230. The problem is that I cannot find a command that will show that the SHA1 Key hash is for the new cert. Anyone know how to find this?
thanks in advance.
07-15-2009 05:24 AM
Hi Steve,
Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml
Hope this helps!
Rob
07-16-2009 07:04 AM
Hi Rob,
I've read that, but it assumes that your using the Cisco Upgrade utility which determines the SHA1 hash from the key and inputs it into the WiSM. we have about 1000 (non-MIC) waps that need to be converted over and doing them 10 at a time is not going to cut it. Therefore I want to write a script that will do it for us 100 at a time. My last stumbling block is figuring out how to get the SSC's SHA1 key hash from the wap once the certs been created. IOS commands only seem to provide the MD5 hash.
07-25-2009 08:58 PM
would this work?
show crypto pki certificates
Regards,
Roman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide