T37 onramp on 28XX

martin1.plank · ‎07-13-2009

Hi!

I've configured T37 on-ramp on an 2811 with ios 12.4.15T8 and all works fine.

with long faxes it took up to 1700 sec (e.g with 20 pages) to receive a fax.

Is it possible to speed up the transfer?

Here's the config:

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send server 10.10.10.5 port 25

mta send subject "Cisco-powered Fax System"

mta send postmaster postmaster@mtelco.com

mta send mail-from hostname 12900.scanfax01.mtelco.com

mta send mail-from username $s$

!

application

service app_faxmail_onramp flash:app_faxmail_onramp.2.0.1.3.tcl

!

dial-peer voice 40 pots

description ***** fuer FAXtoMAIL*****

service app_faxmail_onramp

incoming called-number 2600[34]T

direct-inward-dial

!

dial-peer voice 41 mmoip

description ***** fuer FAXtoMAIL zum SMTP *****

service fax_on_vfc_onramp_app out-bound

max-conn 5

destination-pattern 26003

information-type fax

session target mailto:test1@mtelco.com

!

dial-peer voice 42 mmoip

description ***** fuer FAXtoMAIL zum SMTP *****

service fax_on_vfc_onramp_app out-bound

max-conn 5

destination-pattern 26004

information-type fax

session target mailto:test2@mtelco.com

nreyesvgkn · ‎07-27-2009

Hi Martin1,

Thanks for this document is really helpfull.

But I have some questions if you don't mind.

I'm trying to do the same but I don't know how to configure my email server, actually I have a dummy question, do I need an Unity server or CUE?, I think that no, I have one but I'm not using on this lab. The question about the email server is because I'm using a free software that I download from the web, but after this lab I need to use the corpotare server, so, my question is, what are the configs that I need to do in the email server? do I have to do something special? or just create a mailbox and that it?

Thanks in advance for your support, and sorry about my english.

Regards, Saludos

Nelson