Radius Accounting setup

Unanswered Question
Jul 14th, 2009


I'm working with AS5350 and ClearBox RADIUS server. My objective was to dump all the call details to my ClearBox. Currently, I have configured some radius parameters in CiscoAS5350.

radius-server host

auth-port 1813 acct-port 1812

radius-server key 7 12481603171B5B55

radius-server vsa send accounting

I tried to make a call in and call out, but I have not seen any packets from cisco even after I issued debug radius accounting.

Your great help or suggestion is higly appreciated.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jagdeep Gambhir Tue, 07/14/2009 - 09:07

Do you have these aaa commands,

aaa accounting exec default start-top group radius

aaa accounting network default start-stop group radius

aaa accounting connection h323 start-stop group radius



Do rate helpful posts

worldcalltel Tue, 07/14/2009 - 17:49


thank you for your prompt response. Now I have seen a useful information on the debug radius accounting. My question now, is from cisco perspective what information does it send by default ? because i had captured a debug information, see details below:

Jul 15 01:43:39.556: RADIUS/DECODE: parse response no app start; FAIL

.Jul 15 01:43:39.556: RADIUS/DECODE: parse response; FAIL

.Jul 15 01:43:39.640: RADIUS: No response from (,1812) for id 1646/164

.Jul 15 01:43:39.640: RADIUS/DECODE: parse response no app start; FAIL

.Jul 15 01:43:39.640: RADIUS/DECODE: parse response; FAIL


This Discussion